Pneumatic Gear Vibrator Turbine Vibrator Gt Series

• Customization: Available
• Type: Circular
• Function: Thin Oil Shaker, High Frequency Vibrating Screen
• Model NO.: k6 k8 k10 k12 k16 k20 k25 k32 k36 k40 k48
• Transmission Structure: Vibrating Screen
• Usage: Mine Shaker, Experiments Shaker, Lightweight Fine Shaker
• Works: Rotary Vane Shaker
• Object: Food Processing
• Shaft Number: Single
• Running Track: Linear Vibrating Screen
• Supporting Device: Coil Spring
• Warranty: 2 Years
• Customized: Customized
• Condition: New
• Transport Package: Carton Pallets
• Trademark: ALITA PNEUMATIC
• Origin: China

Product Description

SMC GT Series Electric Industrial Turbine Pneumatic Ball Vibrators for Hopper
K30 G 3/8" Industrial Pneumatic Turbine Vibrators K Series Oscillator K32 K36 for Food Ingredient bins Pharmaceutical
Pneumatic Gear Vibrator Turbine Vibrator GT Series Features:
Vibration intensity can be adjusted based on air pressure, can immediately start, stop, fast, low-noise, vibration force, security.
Pneumatic Gear Vibrator Turbine Vibrator GT Series Application:
Feed material conveyor, vibrating screening, vibrating hopper, to help fill packaging, foundry sand mold vibration.
Pneumatic Gear Vibrator Turbine Vibrator GT Series Works:
Copper eccentric gear installed counterweight impact ai intake charge into the gear thrust gear rotates, the eccentric rotation of thecentrifugal weight with vibration, the gear driven by a bearing, low noise.
pneumatic turbine vibrator:  B GT8 GT10 GT13 GT16 GT20 GT25 GT30 BGT36 GT40 GT48
GT-8 GT-10 GT-13 GT-16 GT-20 GT-25 GT-30 BGT-36 GT-40 GT-48
Feature :
GT type pneumatic vibrator , using NSK bearing imported from Japan
No lubrication only clean air is required
Maximum temperature 120°C =250°F
Noise level range 60 ~75 dBA,very quiet
This series combines high-speed processing & eccentric torque to make a strong vibration force.
The body is made from an extruded stove enamelled aluminium section and the hard coated end plates enables the vibrators to be used in the food and pharmaceutical industries.
The GT series turbine vibrators conform to current international noise regulations under factory test conditions.
 
Application:
GT series vibration is produced by the central force of the positive and negative unbalanced moments in the rotor
The rotor is supported on two heavy duty, prelubricated, matched shielded ball bearings. A special long life grease ensures a long working life.
The inner and outer raceways of the bearings are designed so that the bearings can be easily replaced using only a pin-wrench.
The endplates are fitted with right- and left-hand threads and are self-locking.

Performance:
Model	Frequency			Centrifugal force						Air consumption L/ Minute
	V.P.M. x 1000
	2 Bar	4 Bar	6 Bar	2 Bar	29 PSI	4 Bar	58 PSI	6 Bar	87 PSI	2 Bar	29 PSI	4 Bar	58 PSI	6 Bar	87 PSI
	29 PSI	58 PSI	87 PSI	N	LBS	N	LBS	N	LBS	Ltr.	CF	Ltr.	CF	Ltr.	CF
B GT-8	36	42	46	990	223	2060	464	2910	655	46	1.6	80	2.8	112	3.9
B GT-10	27.5	35	37.5	840	189	1390	313	2400	540
B GT13	26	30	33	1400	315	2440	549	3730	839	120	4.2	200	7	290	10.2
B GT-16	17	21.5	24	1220	275	2090	470	3160	711
B GT20	17	20	23	2170	488	4040	909	5520	1242	185	6.5	325	11.4	455	15.9
B GT-25	12	15.5	17	2120	477	3510	790	5070	1140
B GT30	13	14	16	3380	760	5430	1222	7540	1696	330	11.5	530	18.5	745	26
B GT-36	8	10	13	3290	740	5360	1206	7190	1618
B GT40	7.7	8.8	9.5	4300	968	7300	1642	9800	2205	425	15	700	24.6	970	34.2
B GT-48	6	7.5	9.7	4900	1102	7700	1732	10500	2363
* Data obtained with a Kistler 3axis dynamometer on a heavy laboratory test block and displayed by Kistler control
monitor (COMO). Frequency and force will decrease on a less rigid mount. Specificationssubject to change