Air Ride Suspension Brass Solenoid Valves

• Customization: Available
• Material: Aluminum Alloy
• Certification: ISO10012, BSCI, GMP, GSV, ISO13485, OHSAS18001, ISO14001, ISO/TS16949, ISO9001
• Car Make: Volkswagen, WuLing, Benz, BMW, Hyundai, Honda, Toyota, Jeep, Nissan, Ford, Buick, Chery, Chevrolet, Cadillac, Geely, Roewe, Audi, Peugeot, Lexus, Volvo, Mazda, Kia
• Position: Rear
• OEM: Yes
• Type: Buffer for Suspension
• Transport Package: Carton Pallets
• Specification: G1/4 G3/8 1/4NPT 3/8NPT
• Trademark: ALITA PNEUMATIC
• Origin: China
• HS Code: 8481802190

Product Description

solenoid valve 2w040-10  are 2/2way, direct action type, are most popular valves for many conditions, especially in the water treatment system, such as water heater. It can start working at zero differential pressure. Normal working pressure is 0~7bar, high pressure 20bar are optional. 
Specification:

Model	2W025-06	2W025-08	2W040-10	2WH012-06	2WH012-08	2WH020-10
Orifice Size(mm)	2.5mm	2.5mm	4mm	1.2mm	1.2mm	2mm
Port Size	G1/8"	G1/4"	G3/8"	G1/8"	G1/4"	G3/8"
CV Value	0.23	0.23	0.6	0.05	0.05	0.15
Working Medium	Air,Water,Oil
Operation	Direct Action
Acting Type	Normal Close
Operation Fluid Viscosity	20 CST Below
Operating Pressure	0~0.7MPa			0~2.0MPa
Max. Pressure Resistance	1.0MPa			3.5MPa
Material of Oil Seal	NBR or VITON
Operating Temperature	NBR for -5 ~80°C & VITON for -5~150°C
Voltage Range	±10%
Material of Body	Brass

Good replacement to Accuair AA-VU4  Air suspension valve block With E-level
Structure:Control
Pressure:High Pressure

Power:Solenoid
Material:Alloy
Temperature of Media:High Temperature
Media:Air
Port Size:1/4" 3/8" 1/2"
Place of Origin:China (Mainland)
Model Number:VU2
Brand Name:ALITA PNEUMATIC
Application:Air Suspension, Air Suspension
Air Ride Suspension Manifold Valve 1/2" Fast Air Bag System Control
VU4 valves air engine custom parts, Improved diaphragm design, more efficient coil with less current draw, 9 foot switch box wire harness AIR BAG SUSPENSION VALVE BLOCK The New Design Air Suspension Solenoid Valve (Accuair Solenoid Valve Manifolds)  is engineered to provide the cleanest installation and most reliable operation on the market. This electronic solenoid valve unit inflates and deflates up to (4) individual Air Springs and has built-in push-to-connect 3/8" D.O.T. approved air fittings for all of its plumbing connections. It's more smart than our previous manifolds Assembly Valve Block wiring harness 160-4F Solenoid Valve.Good replacement to Accuair AA-VU4  Air suspension valve block With E-level

Compatiable Suspension Type	4-Corner Full Air Suspension
Voltage Requirements	10.5-16 Volts
Current Requirements	1.1 Amps (for each of the (8) Valves)
Connectors	IP67 certified (immersion up to 3 ft)
Fitting Size	3/8" D.O.T. / P.T.C (x 8), 1/4" NPT (x 4)
No. of Inlet Ports	2
No. of Exhaust Ports	2
Max Operating Pressure	200Psi
Cv Flow Factor	0.33
Average Adjustment Time	2.2 Seconds (from 10% to 50% of travel)

The VU4 4-Corner Valve and VU2
 2Corner Valve Units are engineered to provide the cleanest installation and most reliable operation on the market. The VU4 electronic solenoid valve unit inflates and deflates up to (4) individual Air Springs and has 1/4" NPT ports for use with any fittings that you choose for all of its plumbing connections. The VU2 electronic solenoid valve unit inflates and deflates up to (2) individual Air Springs and has 1/4" NPT ports for use with any fittings that you choose. The robust internal solenoid valve architecture maximizes flow rates, provides bubble-tight sealing, and guarantees operation up to 200 psi for millions of cycles. All of this technology is housed in a unique enclosure design which routes each of the solenoid wires to a single weatherproof connector, eliminating typically loose wires. This not only improves the appearance, but it also guarantees proper operation for every installation. With an overall size of only 5"x 3"x 3" with the VU4 and 3.08"x 2.75"x2.75" with the VU2 and the ability to survive harsh under vehicle environments, this product is ideal for any application.
1/4" NPT  3/8NPT FITTINGS FOR ALL PORTS
This VU4/VU2 valve unit inflates and deflates up to (4) individual Air Springs or (2) individual Air Springs and has all 1/4" NPT threaded ports, (no fittings included).
PRE-WIRED WITH PLUG-N-PLAY CONNECTOR
High quality weather-proof plug-n-play harnesses make for fast and accurate wire connections that will last in the harsh under-vehicle environment.
ALL STAINLESS STEEL VALVE COMPONENTS 200 PSI DIRECT OPERATED BUBBLE-TIGHT VALVES
The robust internal solenoid valve architecture maximizes flow rates, provides bubble-tight sealing, and guarantees operation up to 200 psi for millions of cycles.